NCERT Class 6 Science, Chapter 5
Class 6 Science Chapter 5: Measurement of Length and Motion
Measurement of Length and Motion is Chapter 5 of Curiosity, the NCERT Class 6 Science textbook. Measure length with suitable units and scales, describe position with reference points, and classify linear, circular and oscillatory motion.
- 40 practice questions
- 6 key ideas
- 1 worked example
- 1 3D Learning lab
What does Class 6 Science Chapter 5 cover?
- Need for standard units. Body-part units such as handspan differ between people, so standard units are needed.
- SI length units and conversions. The SI unit of length is metre; kilometre, centimetre and millimetre are related units.
- Correct measurement with scales. Use a suitable measuring device, place it correctly, read with the eye above the mark and subtract when zero is broken.
- Measuring curved lines. Curved lengths can be measured with flexible tape or thread that is then straightened.
- Reference point, position, rest and motion. Position, rest and motion are described with respect to a reference point and time.
- Types of motion. Linear motion is along a straight line, circular motion along a circle, and oscillatory motion to and fro about a fixed position.
Measurement of Length and Motion: chapter notes
Notes for Class 6 Science Chapter 5, with worked examples and things to try at home. They follow the steps of this chapter's Learning lab.
Deepa’s uniform. Deepa’s mother asks for two metres of cloth and tells the tailor to add char angula. Deepa’s class discusses why different ways of measuring can give different numbers.
Try at home: Handspan table
Five students measure the same table with their handspans. Record values such as 13, slightly more than 13, between 13 and 14, and compare handspan sizes.
In the Learning lab (story stage): Tap each one to meet it, then match every clue to a body unit or a standard unit. Notice why everyone needs the same unit.
Standard units
To make measurements comparable everywhere, scientists use SI units; length is measured in metre, written m. Symbols such as km, m, cm and mm stay in small letters. Do not add 's' for more than one (write 5 cm, not 5 cms), do not put a full stop after a symbol unless the sentence ends, and leave a space between the number and the symbol.
| Length relation | Meaning |
|---|---|
| 1 km = 1000 m | large distances |
| 1 m = 100 cm | metre scale divisions |
| 1 cm = 10 mm | small marks on a 15-cm scale |
In the Learning lab (story stage): Tap each one to meet it, then match every clue to the unit it describes. Notice how each unit links to the next.
Try at home: Scale placement
Measure a pencil with a 15-cm scale. Keep the scale in contact with the pencil along its length and read with your eye directly above the tip.
In the Learning lab (ruler): Measure a pencil from the zero mark, then from the 2 cm mark as if the scale's end were broken, keeping your eye right above the mark. Subtract the two readings to get the length.
Curved lengths
For a curved line, place a thread along the curve, mark the ends, straighten the thread and measure it with a scale.
In the Learning lab (story sequencer): Drag the cards into order to measure the curved arch for Anish's string lights.
Reference point
We describe position by comparing it with a chosen fixed point; a kilometre stone may use Delhi as that reference.
Try at home: Rest and motion from two views
Discuss passengers sitting in a moving bus. They are at rest with respect to the bus seats but in motion with respect to a roadside building.
In the Learning lab (story stage): Tap each one to meet it, then match every clue to At rest or In motion. Notice the reference point in each clue.
Motion types
Falling eraser or march-past shows linear motion; a whirled eraser shows circular motion; a swing or vibrating strip shows oscillatory motion.
In the Learning lab (types of motion): Set each thing going and watch its dots, then sort every example. Notice whether it moves straight, in a circle, or to and fro.
Worked example: Measuring from a broken zero
A scale starts clearly at 1 cm but the zero mark is broken. A pencil extends from 2 cm to 11 cm. What is its length?
- Read the mark at one end: 2 cm.
- Read the mark at the other end: 11 cm.
- Subtract: 11 cm − 2 cm = 9 cm.
Answer: The pencil is 9 cm long.
Mistake to avoid: Using a rigid straight scale for a curved path and reporting only the distance between its ends. Use a thread along the curve, then measure the straightened thread.
Measurement of Length and Motion: extra questions with answers
31 of the 40 questions in our Class 6 Science Chapter 5 practice set. Try each one before you open the answer.
Q1. A handspan can be used for rough measuring, but it varies from person to person and is not standard. (True or false?)
Show answer
Answer: True
The table length can be expressed in handspans, but handspans differ between people.
Q2. Convert 1.5 km into metres.
Show answer
Answer: 1500 m
1 km = 1000 m, so 1.5 km = 1500 m.
Q3. Which device is most suitable for measuring the girth of a tree directly, in one go?
- straight metre rod
- 15-cm ruler used in parts
- tailor's flexible tape
- thread followed by a ruler
Show answer
Answer: (c) tailor's flexible tape
A flexible tape can go around a curved surface.
Q4. A student measures only the straight distance across a bottle cap and calls it the curved base length. Explain the mistake.
Show answer
Model answer: The straight distance across the cap is not the path around the curved base. To measure the curved part, a thread or flexible tape should be placed along the curve and then measured.
This follows the curved-line method.
Q5. Assertion (A): The same passenger can be at rest and in motion in different descriptions.
Reason (R): The reference point may be the bus seat or a building outside the bus.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: (a) Both A and R are true, and R is the correct explanation of A.
Both are true, and the reason explains the two descriptions.
Q6. A falling eraser moving straight down is an example of
- circular motion
- linear motion
- oscillatory motion
- reference point
Show answer
Answer: (b) linear motion
It moves along a straight line.
Q7. The width of four fingers is called char ______.
Show answer
Answer: angula
Deepa's mother uses char angula while speaking to the tailor.
Q8. A broken scale reading is 1.0 cm at one end and 10.4 cm at the other end. What is the object length?
Show answer
Answer: 9.4 cm
Subtracting the first reading from the second gives 9.4 cm.
Q9. Assertion (A): Body-part units can create confusion in trade and construction.
Reason (R): The length of a foot, fist or handspan can differ from person to person.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: (a) Both A and R are true, and R is the correct explanation of A.
Both statements are true, and the reason explains the confusion.
Q10. A rigid straight scale placed between the two ends of an arch gives the length of the arch curve. (True or false?)
Show answer
Answer: False
That measures the straight distance between ends, not the curved path.
Q11. One metre is equal to ______ centimetres.
Show answer
Answer: 100
1 m = 100 cm.
Q12. Why was the shopkeeper’s measuring rod better than handspan for selling cloth?
Show answer
Model answer: A measuring rod uses a standard unit, so both buyer and seller can agree on the length. A handspan would vary with the person's hand and could give different amounts of cloth.
The opening story contrasts metre cloth with angula and body measures.
Q13. Deepa is seated in a moving bus. With respect to which reference point is she at rest?
- a roadside tree
- a kilometre stone behind
- her bus seat
- a building outside
Show answer
Answer: (c) her bus seat
Her position relative to her seat is not changing.
Q14. Assertion (A): A scale with a broken zero mark can still measure length.
Reason (R): A 15-cm scale has centimetre marks and smaller millimetre marks.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: (b) Both A and R are true, but R is not the correct explanation of A.
Both statements are true, but the reason describes scale divisions rather than the broken-zero subtraction method.
Q15. A passenger sitting in a bus must be in motion with respect to the bus seat because the bus is moving on the road. (True or false?)
Show answer
Answer: False
With respect to the bus seat, the passenger's position is not changing.
Q16. A flexible measuring tape is useful because it can bend along a ______ surface.
Show answer
Answer: curved
Flexible tapes can follow girth or curved paths.
Q17. Why should the Kabaddi court group first choose a reference point on the ground?
Show answer
Model answer: A reference point lets everyone measure distances from the same fixed place. Then lines can be placed consistently instead of starting from different places.
Deepa suggests choosing a reference point before drawing lines.
Q18. Which report is written in the chapter's preferred style?
- 12 centimetres without a space
- 12 cm
- 12 cms
- 12 c.m.
Show answer
Answer: (b) 12 cm
There is a space between number and symbol; the symbol has no plural s or full stop within the sentence.
Q19. Assertion (A): Circular motion can repeat after a fixed interval, but a swing cannot do so.
Reason (R): A swing can move to and fro about a fixed position repeatedly.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: (d) A is false, but R is true.
The assertion is false because oscillatory motion can also be periodic; the reason is true for a swing.
Q20. The symbol for centimetre is written as cm, not cms. (True or false?)
Show answer
Answer: True
Unit symbols are not made plural.
Q21. How is circular motion different from oscillatory motion? Give one example of each from the chapter.
Show answer
Model answer: In circular motion an object moves along a circular path, such as an eraser whirled on a thread. In oscillatory motion it moves to and fro about a fixed position, such as a swing.
The definitions are in the types of motion section.
Q22. What is the SI unit of length?
- centimetre
- metre
- kilometre
- handspan
Show answer
Answer: (b) metre
The SI unit of length is metre, symbol m.
Q23. A scale can be held far above the object and still give the most reliable length. (True or false?)
Show answer
Answer: False
Keep the ruler touching the object and aligned with the length being measured.
Q24. Why can two careful students still get slightly different lengths for the same pencil?
Show answer
Model answer: Small differences may come from scale placement, eye position, the exact end chosen for reading, or the smallest division of the scale. They should repeat and compare methods.
Activity 5.1 asks students to compare measurements and discuss reasons.
Q25. Where should the eye be while reading the scale at the pencil tip?
- above the zero mark at the start
- from a slanting left side
- from a slanting right side
- directly above the tip
Show answer
Answer: (d) directly above the tip
Read the scale with your eye directly above the mark at the pencil tip; looking from a slant gives a wrong reading.
Q26. An item is moving when its position, compared with a chosen reference point, changes over time. (True or false?)
Show answer
Answer: True
This is the chapter definition of motion.
Q27. A friend says, “If an object is moving, everyone must describe it the same way.” Use the bus example to respond.
Show answer
Model answer: Descriptions depend on reference point. A seated passenger is at rest relative to the bus but in motion relative to trees or buildings outside, so both descriptions can be correct.
The chapter explicitly compares these two reference points.
Q28. Which method suits the length of a curved line drawn on paper?
- thread along the curve, then straighten it
- count handspans across the paper
- read a kilometre stone near it
- measure the straight gap between the two ends
Show answer
Answer: (a) thread along the curve, then straighten it
The chapter uses thread or flexible tape for curved lines.
Q29. A swing moving to and fro about its fixed position shows oscillatory motion. (True or false?)
Show answer
Answer: True
To-and-fro motion about a fixed position is oscillatory.
Q30. On a road stone marked “Delhi 60 km”, what is Delhi in this situation?
- unit symbol
- moving object
- distance unit
- reference point
Show answer
Answer: (d) reference point
The distance is stated with respect to Delhi.
Q31. 1 km is equal to 100 cm. (True or false?)
Show answer
Answer: False
1 km = 1000 m, while 1 m = 100 cm.
Common mistakes in Measurement of Length and Motion
- Writes unit symbols with plural s or missing space from the number.
- Thinks rest or motion can be decided without a reference point.
- Thinks handspan or stride gives the same measure for everyone.
- Thinks a scale cannot be used if the zero mark is broken.
In the app, every wrong answer comes with an explanation, and later questions come back to the idea that was missed.
Quick revision: Measurement of Length and Motion
- Body-part measures vary, so standard units are needed.
- Use metre, centimetre, millimetre and kilometre with correct symbols.
- Correct scale placement and eye position reduce error.
- Thread or flexible tape helps measure curves.
- Reference point decides position, rest and motion.
- Linear, circular and oscillatory motions describe different paths.
3D Learning lab for this chapter
Measure lengths accurately and decide motion using reference points. In the app it is a guided, step-by-step Learning lab of about 50 minutes. Hands-on 3D tools in this lab: story stage, ruler, story sequencer and types of motion. Your child turns, drags and builds with them to see the idea.
Practise Class 6 Science Chapter 5 with an explanation for every answer
Every chapter has free preview questions. Start free from this page and this chapter is fully open as your child's free Science chapter. No card needed.